2 inch 200gpm Suction Assembly Stainless Steel
Artikelnr.: PL-10378
| Type of product: | Suction |
| Specification and colour: | 2" S - Stainless Steel |
| Most common size reference: | 2 inch |
| Overall outer dimensions approx: |
Diameter of face: 127mm Height if stood on its face: 140mm |
| Internal diameter size: | 61mm |
| Fits hole size: | 85mm |
| Optimum flow rate: | 200 gallons per minute. When using a specific suction you should take in to account the required flow intake for the pump you will be plumbing to and also the heater. On ALL systems it is required by BISHTA standards to install 2 suctions per pump to avoid entrapment and or disembowelment. |
| Commonly used with: | 2 inch rigid pipe and 2 inch flexible rigid pipe. |
| Additional notes: |
Best to use a plumbing cleaner then pipe cement to assemble. Pipe work pushes inside this part at the female end. Assemble through the spa shell with silicone, you can use a gasket instead of the silicone but not both together as this often causes the gasket to spurge out the side and would cause a leak. |