Account inloggen

BISHTA - Promoting safe spa water

Balboa Approved Stockist

HydroAir Approved Stockist

Pool and Spa Scene

1.5 inch 90 Low Profile Suction or Drain White
1.5 inch 90 Low Profile Suction or Drain White
Artikelnr.: PL-10368
Type of product: Drain but can be used as a suction
Specification and colour: 1.5" socket - white
Most common size reference: 1.5 inch
Overall outer dimensions approx: Diameter of face:
Height if stood on its face:
Internal diameter size:  
Fits hole size:  
Optimum flow rate: 100 gallons per minute. When using a specific suction you should take in to account the required flow intake for the pump you will be plumbing to and also the heater. On ALL systems it is required by BISHTA standards to install 2 suctions per pump to avoid entrapment and or disembowelment.
Commonly used with: 1.5 inch rigid pipe and 1.5 inch flexible rigid pipe.
Additional notes:

Instead of a straight socket style connection this is a 1.5 inch 90 elbow fitting. This style of fitting has been seen in Chinese Spas but can be used as a space saver on any Hot Tub.

Best to use a plumbing cleaner then pipe cement to assemble. Pipe work pushes inside this part at the female end.

Assemble through the spa shell with silicone, you can use a gasket instead of the silicone but not both together as this often causes the gasket to spurge out the side and would cause a leak.

Gerelateerde producten

De volgende gerelateerde producten zijn misschien ook interessant.